The only console-style cup holder that we have that is close to the diameter you are seeking without narrowing at the bottom is the 2-7/8 inch diameter Optronics Drop In Cup Holder # 302B. The Optronics cup holder is designed to drop into your current Optronics Drop In Cup Holder with Handle Rest # 09017101B. However, you will still an open cavity on your current cup holder. Unfortunately, we do not currently have something that can cover that opening.
If you are looking for something... view full answer...
I went out to our warehouse with a 32 oz Yeti cup I borrowed from a co-worker so I could take a look at the Thule Cargo and Drink Holder # TH20201514 referenced in your question. I did find that the cup fit perfectly and had a nice snug fit inside the cup holders. The entire bottom (narrow) portion of the cup fits without issue.
This console will allow you to add two cup holders along with extra storage space to your Thule Chariot 2-Child Carrier. IT also fits the Cross, Lite, Cheetah... view full answer...
While the lights might still work for the functions on the cupholder that actual switches in the cupholder may not. If you haven't already I would try swapping the cupholders to see if that makes a difference or not. If it's not the cupholder like the part # 195-387597 it's probably the power control box like the part # LC36FR which is for the Seismic line. You can try swapping those too to see if that allows the one side to work.
If it is the control box hopefully you do have a Seismic... view full answer...
I do have an option for you but we only offer the Clazzio Custom Seat Covers in sets, front + middle or front + middle + rear. I have attached a list of these options for you that vary by features such as under seat storage and rear row cup holders.
If you are only looking to cover the front two seats then the best option we have is the Covercraft Work Truck SeatSaver Custom Seat Covers part # SS2372PCCT for bucket or part # SS3374PCCT for 40/20/40 bench. These both come in a light gray color. view full answer...
The control box of your couch is not interpreting the switch turning off and on. This is evident as the other functions of your couch are working properly with the cup switch. So you'd need the replacement control box part # 195-387596 and you'd be set. view full answer...
I highly recommend the Covercraft Carhartt SeatSaver Custom Seat Covers - Front - Gravel # CC34QW which fits the front bench seat of your 2021 Silverado 1500 crew cab. This is made of a durable cotton duck weave fabric that is also water-repellent, so you can rest assured that your truck seats will have superior protection.
You can get a matching set for the rear bench seat, but it comes in two configurations that you will need to choose from. If your rear seat is split 40/60 and does... view full answer...
I checked with Covercraft and for your 2015 Chevy Silverado 1500 crew cab here are the following options for Gray colored Carhartt seat covers.
# SSC3437CAGY for a 40/20/24 front seat with a seat air bag and storage under center console.
# SSC3439CAGY for 40/20/24 front seat with seat air bag and no storage under center console.
# SSC2477CAGY for sport bucket seats with seat air bag.
# SSC2504CAGY for regular bucket seats with seat air bag. view full answer...
Yes, we do have a trike bike rack to carry your tricycle. The SeaSucker Trike Rack for 1 Trike # 298-BD1005 is made in the USA and uses vacuum cups to mount to the roof of your car, allowing you to carry your trike. You can position the rear wheel holders where needed to accommodate your 27"-30" wheel spread. view full answer...
Try removing the good working cupholder and installing it on the side that isn't working. Most likely that will fix the issue and indicates that you need a new cupholder like with the part # 195-387597 that you referenced. view full answer...
The correct charcoal black Covercraft Seat Covers for your 2013 Chevy Silverado crew cab with 40/20/40 seats, center storage, and air bag seats is the part # SS3414PCCH that you referenced. We confirmed that this fits your specific vehicle so it would work well. view full answer...
Sounds like possibly a loose connection to the cupholder wiring connectors of your Thomas Payne couch or the cupholder wiring is bad and would need to be replaced. For a replacement we have the part # 195-387597 which in the product pictures you can see how it connects to the couch's wiring.
Also it could be a control box like the part # 195-387596 for if you have a Momentum. To test if it's a control box what you can do is swap the left side control box with the right side. If the problem... view full answer...
AirBedz has confirmed the fit of the AirBedz XUV Air Mattress # 341031 for your 2014 Toyota Sienna. Due to the length of this being 66 inches the second row of seats most likely can be left up but you'd have to measure to be sure. I looked up dimensions of the cargo area of your vehicle and from what I see it looks like you'd be fine folding down the third row and leaving the second up. This means you'd be able to leave the cupholder up as well. view full answer...
While we don't have the exact video you would like for the Gen-Y Cushioned weight distribution shank part # 325-GH-1202 that you referenced if you check out the 1:55 mark of the attached review video you can see a view of the shank as we travel on our test course and see how it reacts hitting bumps. view full answer...
You are on the right track but here's the difference. If your center console has cupholders you would want the part # SSC3437CAGY. If you center console does not have cupholders you would want the part # SSC3439CAGY. Aside from that they both fit the 2016 Chevy Silverado 1500 double cab with 40/20/40 seats. view full answer...
I have the perfect solution that will allow you to mount a ski carrier on a variety of different vehicles. I recommend using the SeaSucker Monkey Bars # 298-SX6000B which uses heavy duty suction cups to attach to your vehicles instead of using a vehicle specific foot pack and cross bars. The SeaSucker Monkey Bars are FAR superior to other universal racks in terms of fit, quality and durability. These suction cups are rated at 210-lbs of pull pressure each to provide a secure fit on your... view full answer...
In your 2015 Ford Transit T250, there isn't a brake controller adapter that I'm aware of. You can connect a battery to your 7-way 5 o'clock pin and then check that harness with a circuit tester like # PTW2993. If there is power when connected and no power when not, you've found the correct wire. There is not a harness from any of our manufacturers that is a confirmed fit, so you will need to splice wires. If you can't find the correct fit, you can use # 5506 to wire your brake controller... view full answer...
The best solution for the problem you are experiencing is an anti-sway bar. An anti-sway bar will help with the side-to-side movement, or zigzag, you are experiencing. They are designed to help keep the motorhome going straight down the road
If you are interested in Roadmaster, the anti-sway bar I recommend for you is the Rear Anti-Sway Bar for Motor Homes # RM-1139-146. This bar is designed to help assist the factory sway bar, not replace it. This anti-sway bar fits coaches with 15,700,... view full answer...
From the design of our rooftop ski holders and the crossbar space required for a rooftop cargo bag, the only feasible option is to use the SeaSucker Ski and Snowboard Carrier - Vacuum Cup Mounted - 4 Pairs of Skis or 2 Board # 298-SK2425 along with a bag like the SportRack Vista Rooftop Cargo Bag - Water Resistant - 13 cu ft # SR8106. However, since the SportRack (and other cargo bags) will take up a majority of width of the crossbars, the only way to transport your skis is by positioning... view full answer...
We have a couple options for backup cameras you can choose from.
The backup camera I recommend is the Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor, part # SH02Digital. This is a portable system so you have it available to use for different trailers. The camera has a magnetic mount so you can position it where you want. It also includes a suction cup mount for non-magnetic surfaces. The camera features night vision and enables you to see up to 15 ft away in the dark.... view full answer...
Go To Results